Our 67-72 Chevy 52" Swap is one of the best options when it comes to lifting your 67-72 Chevy or GMC truck. Unlike the lift springs that are available for these trucks, this swap provides a great ride along with drasticly improving the performance of your front suspensioin.
The beaty of this swap is that you use stock 52" springs that come in the rear of the 67-72 trucks and swap them to the front. No need for an expensive set of aftermarket springs. With this swap, you can easily take your truck on the toughest trails out there and keep up with all of the linked trucks at a fraction of the cost and complexity.
What's Included:
Each kit will come with two front spring brackets that will replace your stock body mount/spring mount along with an inner frame shackle mount that moves the shackle location back. This bracket is made from 3/8s and 1/4" plate and locates off stock rivet holes. They will come with a set of 3/8s shackles and all mounting hardware.
Install:
We find cuting a cross in the rivets and then using an air hammer to break the heads of the rivets off is the best process for removing the stock brackets.
Once the new brackets are installed, measure to check for square on the front brackets. We have found that with these old truck frames, some adjustments may be needed to ensure square. Some adjustment to the mount holes may be required.
Though our brackets bolt on we do suggest welding them to the frame once final location is determined.
Recomended Parts:
Our 67-72 Chevy 52" Swap Kit pairs very well with our 67-72 Shackle Flip kit as well. These together with stock springs will net 5-6" of lift (depending on the spring pack used).
top of page
SKU: RH-526772
$475.00Price
bottom of page