top of page

This axle truss is for the 2005 and up Dana 60 axles that came under the Ford F250-F350 Trucks. This allows you to 3-link or 4-link your rig with this axle. You will need to cut off the intergrated radius arm mounts that come on these axles along with a portion of the driver side housing. Then you can slip this truss on and weld it in place giving you a solid foundation to build your linked suspension off of!

It will come fully welded with the exception of one of the end plates that will need to be left off so that you can slip the truss between the buble on the inners C's that these axles have. Once dropped in place you can weld up the final piece.



- Full 1/4" plate construction

- Truss covers the full length pf the axle from inner C to inner C.

- Rear for link mounts

05+ Dana 60 Truss

    bottom of page