Our Tacoma 63" Swap Kit makes putting 63" Chevy leaf springs under your 2nd Gen Tacoma easy! This kit utilizes factory holes to located the brackets. We have designed the kit to work with factory perch locations so that if you are keepiong your stock axle, oyu can most likely keep your stock perches on the axle as well.
Along with allowing you to swap 63" springs under your Tacoma, these brackets also help strength the frame sections of your Tacoma that are the most affected by the rust issues in the 2nd gen Tacomas.
We have also tried to keep everything as low as possible with this kit. From the front spring mount tucked as close to the frame as we can to the same at the shackle. Pair this with a set of our Flat Spring Perches and you will have a low rig!
 
Kit Includes:
- 2 Front Spring Mounts
- 2 Rear Shackle Mounts
- 4 Shackles (5" or 6")
- 2 Sets of Bushings and Sleeves
- All Grade 8 Hardware
 
Brackets will ship raw steel