Tired of the tie rod ends constantly wearing out on your stock steering set up? This kit will alleviate that issue and more! This kit was designed to work with a variety of lift heights and suspension set ups. Made from all 1.5x0.250 wall DOM tube and capped with 7/8s rod ends made here in the USA! It uses all 3/4 grade 8 bolts.
You will notice an immediate improvement of your steering and overall handling of your truck with this kit.
Comes fully welded and ready to install.
Please give us a call or email if you have any questions about setup on your particular truck to insure you have the steering installed in the best possible way for your truck.
There are a few different configurations this kit can be installed in depending on the orientation of your track bar. Installed correctly, you will avoid any kind of bump steer.
Will Fit Full Size 2500 and 3500 Dodge Trucks '94-'02. Both Gas and diesel truck equipped with a Dana 60 front axle.
**WILL REQUIRE DRILLING YOUR KNUCKLES AND PITMAN ARM OUT TO 3/4. STOCK STEERING WILL NOT BE ABLE TO BE RE-INSTALLED.
2nd Gen Dodge Steering Kit
- Fully welded tie rod
- Fully welded draglink
- 2-7/8s rod ends
- 2-7/8sx3/4 rod ends
- All grade 8 hareware